Plastobit TItan

Under the order

Appearance	Granules up to 2 mm
Drop point, °C	126-132
Penetration , 1/10mm, ASTM D1321	Less than 3
Specific gravity at 20°C	0.93-0.96

Under the order

Ask a question To favorite

advantages MODIFYING ADDITIVES IN PLASTOBIT BITUMEN

Reduces the laying temperature

Plastobit is soluble in bitumen at temperatures above 106 degrees

Increases heat resistance

Plastobit reduces the negative effects of low temperatures

Forms a mesh structure

During the cooling of the asphalt, the plasterboard forms a mesh structure, which gives additional rigidity to the coating

Improves strength characteristics

Modification with 3% Plastobit improves strength characteristics. In comparison with non-modified bitumen, it reduces the formation of a track by 2 times.

Clutch without additives

With the addition of Plastobit, the resistance against displacement of the bitumen film from the rock surface with water increases, and the resistance to reagents increases

High-quality binder

Plastobit has a positive effect on the melting and mixing processes of all components

Submit a request for a trial batch

Your name: *

Your phone: *

Your email:

All fields are required.
By clicking "submit", you confirm your consent to the processing of
personal data

Similar products

Syntowax E 12G (50G)

Application

Application:

External lubricant / lubricant, plasticizer for polymers (PVC, PP, HDPE, LDPE, Rubbers);
Dispersant and plasticizer in super concentrates (masterbatches, polymer compositions);
Viscosity regulator in hot melt adhesives and adhesives, oils, coolant;
Component of wax compositions (paraffin compositions, model injection formulations for metallurgy, candles);
Temperature and strength modifier in thermoplastics, bitumen.

Not in stock

Syntowax Р24 M20

Application: P24M10 is a micronized polypropylene wax, representing a universal high-temperature additive with a melting point of 146–152 °C, compatible with most coating systems, including solvent-based, powder, epoxy, polyester, acrylic, and UV-curable coatings. Its key function is the formation of a strong and hard protective surface layer that significantly enhances the coating’s resistance to abrasive wear and scratching. At the same time, the wax acts as a highly effective matting agent, providing a uniform, stable, and deep matte finish.

Thanks to its chemical inertness and high melting point, P24M10 remains stable within formulations and during service without negatively affecting other film properties. It is used in protective, industrial, and decorative coatings where increased surface wear resistance, resistance to mechanical damage, and a stable matte appearance are required.

Not in stock

Syntowax EM 115/27 M50

Application: Micronized waxes are used as additives in the production of coatings and surface finishes. They improve gloss and slip properties, promote effective resin dispersion, and form a smooth surface layer that protects against scratching and abrasion.

They are used in powder coatings, architectural paints, and wood coatings.

Not in stock

Wax dispersion Plastema WD 31

Application: Water dispersion of polypropylene wax. Non-ionic dispersion system. Scope of application: effective in the production of water-based paint coatings (lacquers, paints, printing inks, industrial coatings, coatings on wood).

Not in stock