614066, Russia, Perm, Mira 45a
Plastema WC 24
An aqueous nonionic dispersion of polyethylene wax intended for use in coatings. The recommended dosage is 2-5% of the additive in the form of delivery to the general formulation. It is desirable to introduce the additive into the product at the end of the production process. Mix thoroughly before use.
|
Wax drop-off temperature, °C |
80-90 |
|
Viscosity of sDr |
<1000 |
|
Mass fraction of non-volatile substances, % |
35-45 |
|
Average particle size, microns |
15-21 |
|
The carrier |
Water
|
|
The carrier |
Water |
|
Appearance |
Liquid from yellow to orange color |
Application:
It is intended for use in wood coatings and leather processing. The additive improves resistance to mechanical damage, gives a water-repellent effect.
- Application
-
Application:
- External lubricant / lubricant, plasticizer for polymers (PVC, PP, HDPE, LDPE, Rubbers);
- Dispersant and plasticizer in super concentrates (masterbatches, polymer compositions);
- Viscosity regulator in hot melt adhesives and adhesives, oils, coolant;
- Component of wax compositions (paraffin compositions, model injection formulations for metallurgy, candles);
- Temperature and strength modifier in thermoplastics, bitumen.
- Application
-
P24M10 is a micronized polypropylene wax, representing a universal high-temperature additive with a melting point of 146–152 °C, compatible with most coating systems, including solvent-based, powder, epoxy, polyester, acrylic, and UV-curable coatings. Its key function is the formation of a strong and hard protective surface layer that significantly enhances the coating’s resistance to abrasive wear and scratching. At the same time, the wax acts as a highly effective matting agent, providing a uniform, stable, and deep matte finish.
Thanks to its chemical inertness and high melting point, P24M10 remains stable within formulations and during service without negatively affecting other film properties. It is used in protective, industrial, and decorative coatings where increased surface wear resistance, resistance to mechanical damage, and a stable matte appearance are required.