614066, Russia, Perm, Mira 45a
Plastema WEO 23
An aqueous nonionic dispersion of modified polyethylene wax intended for use in coatings. The recommended dosage is 1-4% for the entire formulation. It is desirable to introduce the additive at the end of the production process. Mix thoroughly before use.
|
Wax drop-off temperature |
°C 110-120 |
|
pH |
6-8 |
|
Viscosity, sDr |
<10,000 |
|
Mass fraction of non-volatile substances |
% 50-60 |
|
The carrier |
water |
|
The appearance of the paste |
from white to gray |
Application:
The main areas of application It is intended for use in paintwork. The additive improves scratch resistance, creates a pleasant touch effect and mattifies.
- Application
-
Application:
Micronized waxes are used as an additive in the production of coatings and surfaces, improving their gloss and glide, and they also contribute to good dispersion of resins and form a smooth layer on the surface to protect it from scratches and abrasion. They are part of powder and architectural paints, coatings for wood.
- Application
-
Application:
- External lubricant / lubricant, plasticizer for polymers (PVC, PP, HDPE, LDPE, Rubbers);
- Dispersant and plasticizer in super concentrates (masterbatches, polymer compositions);
- Viscosity regulator in hot melt adhesives and adhesives, oils, coolant;
- Component of wax compositions (paraffin compositions, model injection formulations for metallurgy, candles);
- Temperature and strength modifier in thermoplastics, bitumen.
- Application
-
Application:
- External lubricant / lubricant, plasticizer for polymers (PVC, PP, HDPE, LDPE, Rubbers);
- Dispersant and plasticizer in super concentrates (masterbatches, polymer compositions);
- Viscosity regulator in hot melt adhesives and adhesives, oils, coolant;
- Component of wax compositions (paraffin compositions, model injection formulations for metallurgy, candles);
- Temperature and strength modifier in thermoplastics, bitumen.