614066, Russia, Perm, Mira 45a
Plastema WE 20
An aqueous nonionic dispersion of polyethylene wax intended for use in coatings. The recommended dosage is 2-5% of the additive in the form of delivery to the general formulation. It is desirable to introduce the additive into the product at the end of the production process. Mix thoroughly before use.
|
Wax drop-off temperature, °C |
120-135 |
|
pH |
4.5-6.5 |
|
Viscosity, sDr |
3500-4500 |
|
Mass fraction of non-volatile substances, % |
35-45 |
|
The carrier |
Water |
|
Appearance |
White liquid |
Application:
It is intended for use in paintwork. The additive improves scratch resistance, creates a pleasant touch effect and mattifies.
- Application
-
Application:
Micronized waxes are used as an additive in the production of coatings and surfaces, improving their gloss and glide, and they also contribute to good dispersion of resins and form a smooth layer on the surface to protect it from scratches and abrasion. They are part of powder and architectural paints, coatings for wood.
- Application
-
Application:
- External lubricant / lubricant, plasticizer for polymers (PVC, PP, HDPE, LDPE, Rubbers);
- Dispersant and plasticizer in super concentrates (masterbatches, polymer compositions);
- Viscosity regulator in hot melt adhesives and adhesives, oils, coolant;
- Component of wax compositions (paraffin compositions, model injection formulations for metallurgy, candles);
- Temperature and strength modifier in thermoplastics, bitumen.
- Application
-
Application:
- External lubricant / lubricant, plasticizer for polymers (PVC, PP, HDPE, LDPE, Rubbers);
- Dispersant and plasticizer in super concentrates (masterbatches, polymer compositions);
- Viscosity regulator in hot melt adhesives and adhesives, oils, coolant;
- Component of wax compositions (paraffin compositions, model injection formulations for metallurgy, candles);
- Temperature and strength modifier in thermoplastics, bitumen.